The course aims to provide thorough theory and practical training in the operation of Telehandler Forklifts, enabling delegates to competently and safely carry out the role and pass the CPCS Theory and Practical tests.
If you are booking with less than 3 working days notice from the course start date, please ring 020 3150 1299 to confirm this course.
You MUST have a CSCS test, NOT a card, not older than 24 months; it is the CSCS test NOT CSCS card.
Failure to arrive for the course with the relevant CSCS test completed and in date, will result in you not being permitted to undertake the exams at the end of the course.
No refund shall be given for exams cancelled as a result of you not having the relevant CSCS test completed, failing to attend a course or failing a test!
Bookings made with 3 or less days left prior to the course start date should be confirmed by calling EM Construction Training on 020 3150 1299 during office hours (09:00 am-05:30 pm Monday-Saturday).
We’ll be in contact within 48 hours after you make your booking to collect further information prior to confirming your space on the course.
This course will give delegates a CPCS Red Trained Operator card (on successful completion of CPCS Technical Tests).
Trained Operator Card (RED)
The Trained Operator Card confirms a level of core skills, knowledge, and understanding that can be applied in the workplace until measured as competent against national standards.
Progression to Blue ‘Competent Operator’ CPCS Card
Once you’ve obtained your Red CPCS Trained Operator Card, it will last for 2 years. During these 2 years, you must work towards and achieve your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card that is valid for 5 years.
The Blue Competent Operator CPCS card is achieved through completing a Plant Operations NVQ at level 2; EM Construction Training does offer the NVQ required.
You do not need to take any further exams or come to a training center; we will come to your site or remotely assess you for your NVQ.
The plant operations NVQ required for this category is made up of only 3 units; these can be completed through observations, video recordings, written tasks, etc.
Please call EM Construction Training on 020 3150 1299 for further information about our Plant Operations NVQ provision.
The CPCS A17 E Telescopic Handler Suspended Loads course shall cover the following topics:
- Operating the plant machinery on all normal tasks for which it is designed
- Deciding whether a particular load is safe to lift
- Carrying out routine telehandler servicing and plant maintenance in accordance with the manufacturer’s instructions
- Conducting minor mechanical adjustments
- Preparing and driving the machine on public highways, in accordance with the requirements of the UK Road Traffic Act
- Understanding the purpose and capabilities of the machine and any relevant safety precautions necessary for its operation
- How the handler machine works and the maintenance requirements involved
- The effect of load, size, weight, gradients and ground conditions upon machine stability
- Loading, storage and transit of representative materials
- The basic construction of pallets
- The permitted loading of scaffolds
- Theory Test
- Practical Test
Our CPCS A17 E Telescopic Handler Suspended Loads course tutors are qualified and experienced health and safety professionals, with extensive experience in Construction and Risk Management. All Trainers at EM Construction Training hold numerous health and safety qualifications such as the NEBOSH General Certificate, and the NEBOSH National Certificate in Construction Health & Safety which is well above the required industry standard to ensure that the delivery of the course is to the highest standard.
EM Construction Training can also provide companies with CPCS A17 E Telescopic Handler Suspended Loads Training at their venue. A trainer can be sent to the company address and deliver the course if there are a minimum of 6 candidates. Please contact the office for this service.
1. What topics are covered in the CPCS A17 Telescopic Handler course?
This course covers operating procedures for telescopic handlers, safety regulations, loading and unloading materials, and the use of various attachments on construction sites.
2. Will I receive CPCS certification after completing the course?
Yes, successful completion of the course will earn you a CPCS A17 certification, which is highly recognized within the industry.
3. Are there any prerequisites for this course?
You must have a basic knowledge of construction machinery and hold a valid CSCS card before enrolling in this course.
4. How long is the CPCS A17 Telescopic Handler course?
The course duration varies depending on your experience level, but it typically takes 4-5 days, including both theory and practical assessments.
5. How much does the CPCS A17 course cost?
Prices depend on location, but we offer competitive rates. Contact our team for a detailed quote and any applicable discounts.
6. What job opportunities can I explore after completing this course?
With a CPCS A17 certification, you can work as a telescopic handler operator, operating large machinery on construction sites. This is a high-demand role in the construction industry.
7. What assessment methods are used in this course?
You will undergo both theoretical and practical assessments. The practical test will evaluate your ability to safely and efficiently operate a telescopic handler in various scenarios.
8. How do I sign up for the CPCS A17 course?
You can enrol via our website or contact our support team. After registration, you’ll receive course materials and a schedule.
